Customer Case Study
Johnson Steel Rule Die, a BOBST-certified diemaker in Plainfield, Illinois, was the first shop in the US to run the Serviform IntegraALL. It lets Johnson make custom cut/crease combo rule in-house, as a single piece at custom lengths.
The IntegraALL is Serviform's all-in-one rule processing machine, handling straight cutting, creasing, perforating, cut-crease combo, and Lasercrease rule in a single piece of equipment — no machine switches, no workflow handoffs. It's the next evolution of the IntegraCrease, built for shops where custom combo rule has become a daily bottleneck.
The IntegraALL transforms standard creasing rule into cut/crease combo rule at custom lengths, produced as a single finished piece — no transitions handled by hand. Operation changes along the length of the rule are programmed from the design file and executed in-line, and the machine holds mixed profiles in one piece: shops have run .937" cut with .925" cut in a single length. What used to be a multi-machine workflow with an operator at every handoff is one programmed pass.
Yes — that's the point. The IntegraALL produces cut/crease combo rule in-house from standard creasing rule coil, so shops stop ordering pre-made combo rule with its supplier lead times, minimum quantities, and per-length premiums. Custom lengths are produced on demand from the design file, which means no waiting on a rule order to start a die, no specialty rule inventory sitting on the shelf, and no scrapped pre-cut lengths when a job changes. The rule your die needs today gets made today.
One U.S. shop cut a nine-hour custom combo rule job down to two hours after installing the IntegraALL — the same work, one machine, no handoffs. When rule stops traveling between machines, cycle time collapses and operators go back to shipping dies. Read more
Yes. A motorized sorting unit organizes finished pieces automatically as they come off the machine, cutting handling time and keeping production organized without an operator standing at the outfeed.
Serviform America — factory-trained technicians across the U.S., fully stocked parts and customer service in Atlanta, GA, and remote diagnostics. Made by die makers, for die makers, in Caravaggio, Italy.
The IntegraALL is the next generation of the IntegraCrease. The IntegraCrease centralized cutting, creasing, and Lasercrease rule processing — and produced combo rule by cutting matched sections joined with a dovetail. The IntegraALL takes that workflow a full step forward: cut/crease combo rule comes off the machine as a single finished piece at custom lengths, three next-generation multifunction cartridges run operations like punching, bridging, and chamfering simultaneously, and a motorized sorting unit organizes the outfeed automatically. Same networked SDDS platform, same fully electric design — more of the die produced on one machine, with fewer steps in between.