Insights & Updates for Die Makers | Serviform America Blog

June 3rd, 2026

Ameritek Just Installed the IntegraALL—and Turned a 9-Hour Job into a 2-Hour Job

When a shop has been making dies in this country since 1971, you don’t get to coast. You either keep pushing the edge or you fall behind it. Ameritek, based in Greensboro, North Carolina, has be...

June 1st, 2026

Turn an Equipment Upgrade Into a Tax Advantage: Everything You Need to Know About Section 179 and Section 168 (k) Bonus Depreciation

Now might be the perfect time to upgrade your production line—with potential tax benefits that could make your new machine even more affordable. If you’re considering adding a Serviform bender, ...

May 20th, 2026

Your IdeA Still Works. That’s Exactly Why Now Is the Right Time to Trade It In.

A Second-Generation Machine in a Next-Generation Industry If you are running a Serviform IdeA, you already know what it is capable of. It was built to last, and most of them still are. That is not in ...

May 11th, 2026

Johnson Steel Rule Die Just Became the First Shop in the USA to Run the IntegraALL—Here’s Why That Matters

If you’ve been watching Johnson Steel Rule Die Company, you already know they’re not standing still. At the start of 2026, they added a SkyMilla and a LineA to their floor, a significant p...

May 5th, 2026

How Butler Brothers Elevated Performance with the RotaPro

In our industry, precision is the standard your customers expect every single day. For Butler Brothers, that standard has always been non-negotiable. After successfully rebuilding and pushing forward,...

The latest updates, tips, and innovations in the industry to boost your shop’s performance and productivity.

Ameritek Just Installed the IntegraALL—and Turned a 9-Hour Job into a 2-Hour Job

AdminAllie June 3, 2026 No Comments

When a shop has been making dies in this country since 1971, you don’t get to coast. You either keep pushing the edge or you fall behind it. Ameritek, based…

Turn an Equipment Upgrade Into a Tax Advantage: Everything You Need to Know About Section 179 and Section 168 (k) Bonus Depreciation

AdminAllie June 1, 2026 No Comments

Your IdeA Still Works. That’s Exactly Why Now Is the Right Time to Trade It In.

AdminAllie May 20, 2026 No Comments

A Second-Generation Machine in a Next-Generation Industry If you are running a Serviform IdeA, you already know what it is capable of. It was built to last, and most of…

Johnson Steel Rule Die Just Became the First Shop in the USA to Run the IntegraALL—Here’s Why That Matters

AdminAllie May 11, 2026 No Comments

If you’ve been watching Johnson Steel Rule Die Company, you already know they’re not standing still. At the start of 2026, they added a SkyMilla and a LineA to their…

How Butler Brothers Elevated Performance with the RotaPro

AdminAllie May 5, 2026 No Comments

Why We Exist: Delivering Competitive Advantage Through Constant Innovation

Randi Beth April 22, 2026 No Comments

In die making, standing still is falling behind. Margins tighten. Turn times shrink. Customers expect more precision, more speed, more reliability. The shops that win are the ones that adapt.…

What Keeps Die Shops Running? The Answer Is Expert Service

AdminAllie April 8, 2026 No Comments

Need fast support for your Serviform diemaking equipment? Our factory-trained techs, like Matt, deliver real-time remote help and on-site service to keep your shop running. Fast answers. Less downtime. We’ve…

Still Running a Gerber Profile? Here’s a Way Out.

AdminAllie April 1, 2026 No Comments

When the Machine Still Turns On, but Nothing Behind It Does The Gerber Profile was a workhorse. For a lot of shops, it still runs… But running and being supported…

Why We’re Building the Most Trusted Partner in Die Making

Randi Beth March 26, 2026 No Comments

If you’re a diemaker, you don’t need another vendor. You need a partner. You need someone who understands that when your machine stops, your day stops. When a part is…

Technical Spotlight: Jeff Jensen, Senior Technician

AdminAllie March 6, 2026 No Comments

At Serviform America, our machines are only as strong as the people who support them—and that’s where Jeff Jensen comes in. As our lead technician for benders, Jeff is more…